🔑

Press Station Guide

Polyester · Dino Transfers confirmed

🌡️

305°F

Press twice. You're done!

Confirmed by Dino Transfers — Monroe, WA

1

Step 1

Set Temperature to 305°F

🌡️

Turn the dial or touch the display to 305. Wait for the green light or ready signal.

⏳ WAIT until the press reaches 305°F before touching any shirts!
2

Step 2

First Press — 12 Seconds

⏱️

Place transfer on shirt. Close the press firmly. Count to 12 or watch the timer. Open and peel the carrier sheet.

💡 Count with your finger: 1…2…3…4…5…6…7…8…9…10…11…12 ✓
3

Step 3

Second Press — Cover & Press 8 Seconds

✅

Lay the Teflon sheet over the design. Press again for 8 seconds to seal.

💡 Can't remember 8? Just do 12 again — that's okay!

💡 Why Two Presses?

The first press puts the design on. The second press locks it in so it stays through washing. Both presses = a shirt that lasts!

⭐

Best Transfer Quality

Dino Transfers — Monroe, WA

Transfers feel soft and sink into the fabric. Tested & recommended by MyKey Transfers.

MyKey Transfers · mykeyplans.com · Barb Beck